Critical rationalism faces difficulty in Karl Popper’s Socratic formulation: “I may be wrong, and you may be right, and by an effort, we may find the truth.” But the Socratic elenchus, using refutations, can only give us negative knowledge of general principles, which is not the wisdom we seek. Affirmatively, we can only find a collection of opinions to be coherent, which is one of many. Francis Bacon proposed an improved elenchus to find general truths. You must take up a limited topic to study, then cross-examine your evidence for and against its apparent nature. Experiments contrary to evidence and presumed knowledge are entered as self-contradictions in tables of opposition recorded in an “experimental and natural history.” Such an account highlights a challenging puzzle if the account is to be made coherent. With enough problematized evidence, a coherent reading, or a solution of the puzzle, will be unique. Being both coherent and unique, it will be the truth about that limited reality being investigated. Unlike the method of hypothesis (“Anticipating Nature”), deciphering a coherent model is “Interpreting Nature,” allowing us to find a general truth on a limited topic. Isaac Newton achieved great success using Robert Boyle’s mechanistic version of this method. Using the “experimental philosophy,” he discovered general principles of optics and astronomy.

In this article, an attempt has been made to estimate the amount of sound transmission loss in a flat oval channel by applying the approach of statistical energy analysis. Correct estimation of sound transmission loss in an air conditioning channel is of great importance due to the harmful effects of noise pollution in the environment on human health. Simulation with the statistical energy analysis method is a powerful approach to estimate sound and vibration in problems in which we deal with complex and multi-part systems; is considered. In this method, first, a system is divided into several subsystems, and then by writing a matrix equation that includes the energy exchanges between subsystems and energy loss coefficients; It is investigated from the perspective of vibration and sound estimation.On average, the model presented in this research is able to estimate the sound transmission loss in different dimensions of the air conditioning channels according to the experimental results in the accuracy range of ± 2.5 dB. Considering that it seems that the results obtained from modeling with this method are in good agreement with the experimental data; The results of this research can be used as an efficient approach to estimate noise in oval shaped channels stretched in different lengths.

This paper is dealing with the reactor parameter determination experiments performed at the light water subcritical reactor (LWSCR) in Esfahan. The parameter determination methods are derived from a theory based on neutron source position. The LWSCR reactor system is modeled by Monte Carlo calculations (MCNP4C), WIMSD5B and CITATION, and the criticality safety and neutron flux distribution problems are presented and analyzed. The analysis of the multiplication factors obtained by MCNP4C are in fairly good agreement with the results obtained by WIMSD5B and CITATION. For the flux distribution calculations, the MCNP4C results differ from the experimental observations by less than 12% and by ~5% for the WIMSD5B and CITATION.

Low-frequency noise modeling and estimation is a critical issue in the design of analog and digital circuits, especially for short-channel CMOS technologies. The conventional noise models do not fit the experimental results adequately at frequencies close to DC for amplifiers and close to the carrier frequency for oscillators. Furthermore, measuring this noise necessitates the use of specialized and expensive equipment. In this paper, the bound of carrier trapping and releasing are extracted while examining the characteristics of low-frequency noise using the EMD method, and an innovative model based on carrier number fluctuations is proposed. The method introduces a low-cost measurement system for low-frequency noise. The performance accuracy of this measurement system and the proposed model is evaluated and compared with conventional noise modeling methods. The evaluation results demonstrate the success of the proposed measurement setup and model in estimating near-DC noise.

Application of discrete wavelet transform for identification of a synchronous generator is investigated in this paper. Discrete wavelet transform guarantees global minimization and the accuracy of the identified model can be increased to the desired level by the multiresolution analysis (MRA) of the transform. The proposed method has been tested on a micromachine synchronous generator. In this study, the field voltage is considered as the input and the active output power and the terminal voltage are considered as the outputs of the synchronous generator. Experimental results show good accuracy of the identified model following changes in the operating conditions.

The procedures for measuring, mixing, transporting, and placing heavyweight concrete are similar to those used in conventional concrete construction; however, special expertise and thorough planning are necessary for the successful completion of this type of concrete. The use of heavyweight concrete in construction is a specialized field, Heavyweight concrete is used in counterweights of bascule and lift bridges, but it is generally used in radiation shielding structures to absorb gamma rays and differs from normal weight concrete by having a higher density and special compositions to improve its attenuation properties. When heavyweight shielding concrete is used to attenuate neutrons, sufficient material of light atomic weight, which produces hydrogen, should be included in the concrete mixture. Some aggregates are used because of their ability to retain water of crystallization at elevated temperatures, which ensures a source of hydrogen not necessarily available in heavyweight aggregate Cements would be suitable for conventional concrete and produce the required physical properties, are suitable for use in heavyweight concrete. Low-alkali cement should be used when alkali-reactive constituents are present in the aggregates and a moderate or low-heat cement should be used for massive members, To avoid high and rapid heat of hydration and resultant cracking, it is advisable not to use Type III cement or accelerators unless the concrete temperature is controlled by specially designed refrigeration systems. Thorough examination and evaluation of heavyweight aggregate sources are necessary to obtain material suitable for the type of shielding required. These sources are limited, and a material survey should be conducted to determine availability, chemical and physical qualities. The supplier’ s sources should be inspected to evaluate rock composition, abrasion resistance, and density since these properties may vary from one location to another within a deposit. The purchaser must realize that mineral ores are not as uniform as normal weight concrete aggregates and make appropriate allowances Limited resources and increasing use of concrete, particularly in the industrial production cause that the heavyconcrete be useful. In order to optimize production of heavyconcrete, the most basic parameters that must be changed is the mix design. Optimization of the concrete mixture design is a process of search for a mixture for which the sum of the costs of the ingredients is lowest, yet satisfying the required performance of concrete, such as workability strength and durability. For this purpose, heavy concrete mix design optimization model is firstly defined and then optimal mix design will be achieved, by using an optimization algorithm. The experimental data were utilized to carry out analysis of variance. To develop a polynomial regression model for compressive strength in terms of the five design factors ( cement, coarse aggregate, fine aggregate, water and density ) considered in this study The numerical results shows that the amounts of coarse aggregate and cement are simultaneously reduced and amount of the fine aggregate is increased in the optimum mix design. Considering mass production concrete in nuclear power plants, this optimal mix design methods and reduce the cost of concrete can greatly reduce the cost of construction.